The Ruger 10/22 .22 caliber self-loading rifle is a firearm everybody ought to personal, use, and revel in. The ten/22 is maybe the perfect mixture of reliability and economic system in a rimfire rifle.
Whereas Ruger affords a good-quality takedown rifle and extremely developed goal variations of the ten/22, the value chief, with a plastic inventory and with out sights, is obtainable for simply over 200 {dollars}. It’s provided with an optics mounting rail and makes an excellent base for upgrades. The ten/22 is a rifle that has been across the block.
I’ve used it in coaching and small-game searching. My Ruger rifles have confirmed utterly dependable with high quality ammunition. They seldom fail to perform with even the most cost effective soiled masses. Because it chambers the little large of cartridges, the .22 Lengthy Rifle, I can afford to fireside it typically and experiment with totally different masses.
There are issues concerning the Ruger which may be upgraded and issues to depart alone. Ruger’s rotary ten-round magazines are famously dependable, and the prolonged X magazines are a number of enjoyable to make use of.
The unique ten-round journal doesn’t protrude from the inventory. I take advantage of that journal for bench relaxation and goal work and the X journal for enjoyable. I’ve worn out one .22 rotary journal in fifty years! Shares, optics, and the set off motion could also be upgraded if you want, and chances are you’ll get pleasure from quite a lot of improved accuracy.
The Ruger is definitely disassembled, a giant plus. The rifle is a advantageous selection for learners, however on this case, I’m constructing a rifle for a extra skilled shooter.
Not so extremely upgraded or specialised that it’ll not be helpful as a go-anywhere, do-anything .22, however it’s sufficient of an improve that what it does, it does very effectively.
Tutorial
It’s easy to disassemble the Ruger 10/22.
First, ensure the rifle is unloaded. Did I say unload the rifle? Double-check the chamber!
Then, take away the barrel band. Loosen the retaining screw and bump the barrel band off.
A single bolt holds the motion and inventory collectively. Take away this bolt transfer the protection to the center place to press the motion from the inventory. That’s it.
To put in a {custom} set off group flip the motion the other way up. Bump out the 2 motion pins with a punch. Now right here is the trick- some motion pins merely fall out with little effort.
The newer weapons with painted end could be a ache. Use a punch and a rubber hammer to bump these pins out.Â
With the pins out merely pull the set off group away. Subsequent select a high quality aftermarket set off group. I’ve lengthy expertise with Timney triggers. This rifle was fitted with a Timney Calvin Elite set off.
The Calvin Elite options three set off footwear which may be adjusted for peak and cant. The manufacturing unit setting is simply over 2.0 kilos and really sharp with a speedy crips reset.
Take the set off group and press it into place the place the unique set off group as soon as rested. Run the pins again in and you might be accomplished.
The pins are simple to drop. A tarp or impartial coloration rug within the office is sweet to have.
Don’t dry fireplace the set off outdoors of the rifle. The springs will fly all over the place! That’s how I discovered to exchange Ruger set off springs.
Some enchancment is feasible by altering out the springs. A superior {custom} motion is the higher selection for best enchancment. As soon as the set off is assembled chances are you’ll substitute the motion within the inventory merely sufficient.Â
The interface between the rifle and the shooter might stand enchancment. Manufacturing facility shares are okay, not unhealthy, however not ideally suited both. They’re made to suit many alternative physique sizes. There are numerous good selections, the inventory illustrated is my selection.
Boyd’s shares provide good-quality alternative units for a lot of rifles and custom-grade shares appropriate for searching, tactical use, or competitors. I chosen the AT One laminate inventory. You can not fault it on appears. My rifle could be a goal gun, possibly even falling into the simulated sniper-grade rifle area of interest for follow.
The wooden is minimize and dried—that’s the place the minimize and dry expression originates in woodworking—and completed in laborious wooden veneer. The end is climate—and chemical-resistant.
The inventory could also be set for a size of pull from 12.5 to 14 inches. The comb affords appreciable adjustment as effectively. It weighs about three kilos, which is about .5 kilos greater than the plain Jane Ruger 10/22 inventory.
There was no becoming in any respect, the barreled motion merely went into place. The strains of the inventory are pleasing to the attention and ergonomic match and really feel excellent. I’d not hesitate to make use of the rifle for small recreation searching, casual goal capturing, or some types of competitors.
Adjustment is simple- press a plunger within the inventory to regulate butt inventory size or to boost the comb mounted cheek relaxation.
Barrel Tech
Subsequent, I thought-about the barrel. 10/22 barrels are simple sufficient to alter out. With the motion faraway from the rifle, look below the barrel close to the chamber.
Two screws are holding the barrel in place. Rigorously twist these out. The tough half is slowly turning the Allen wrench. The barrel will normally bump out simply. However not at all times!
A few of the newer rifles with a special end could also be troublesome. Bumping the barrel with a rubber hammer will loosen them up.
Generally, the receiver have to be stabilized in a padded vise. I select a Beyer barrel. Mine is a midweight fluted aluminum barrel.
I’ll copy among the particulars from the Bayer web site—
TWIST- Button-rifled Chromalloy metal liner with exact 1-16″ or 1-9″ rifling for glorious accuracy.  The 1-9″ rifling works effectively for 60-grain subsonic .22 LR ammo.Â
FINISH – We provide a wide range of finishes: Stainless Metal, Matte Black, OD Inexperienced and Customized Colours. Our ceramic finishes are baked on and resists corrosion, scratches, and floor put on.
FLUTES – Flutes are ornamental but additionally serve one other goal to lighten the barrel weight, flutes assist stiffen the barrel and enhance cooling. We provide two sorts of flutes: stright flutes and diamond flutes. Our flutes could be painted or unpainted relying on the specified look.
THREADS – Threads enable for addition of muzzle breaks and silencers. 1/2-28 TPI muzzle threads settle for a wide range of AR-15/M16 flash hiders and muzzle brakes. Threads could be added to any barrels we provide.
MUZZLE BRAKES- Initially muzzle brakes had been created to cut back the rifle recoil. In rimfire barrels muzzle breaks are used to stabilize the muzzle and enhance goal acquisition throughout speedy fireplace competitors. Our muzzle breaks could be coated with {custom} colours to match your {custom} barrel coloration.
Line the barrel up with the receiver and bump it into place, then tighten the barrel screws. Easy as that, no want to fret about headspace, merely butt the barrel into place. Subsequent, I selected an optic.
The Burris Fullfield 6.5x20x50mm is a superb optic with a transparent lens, glorious adjustment, and good magnification. It was an excessive amount of for a .22 rimfire, however the backside line is that I had it readily available.
Alongside the best way I fired plenty of masses for each velocity and accuracy.
CCI Mini-Magazine Segmented – 1220 fps
CCI Mini-Magazine 36 grain Hole level – 1233 fps
Federal Small Recreation Match 40 grain – 1171 fps
CCI Velocitor – 1399 fps
Federal 38 grain Plated Hole Level – 1177 fps
CCI Stinger 32 grain Hole Level – 1501 fps
Remington 40-grain Golden Bullet – 1129 fps
I selected to sight the rifle correctly with the fast-stepping Velocitor loading. As a bonus, this rifle delivers velocity as a lot as ten % greater than my different two 10/22 rifles.
Since accuracy can also be there, I take this as a acquire. From my perspective, benchrest accuracy is sweet, however the true acquire in accuracy is off-hand accuracy. The rifle involves the shoulder rapidly, and the clear set off break makes for glorious sensible accuracy.
How a lot distinction did the {custom} barrel make? I fired a number of three-shot teams at a protracted 50 yards.
Accuracy Outcomes
Federal Hunter Match .5 in.
CCI Mini Magazine 1.0 in.
Remington Golden Bullet 1.0 in.
CCI Stinger .9 in.CCI Velociter .7 in.
That is the primary time the Stinger has turned in the sort of accuracy for me, and I used to be effectively happy. All issues thought-about, these teams fired from a stable bench relaxation are glorious.
Conclusion
The Ruger 10/22 improve is among the many most pleasurable tasks I’ve undertaken. It gives an excellent efficiency enchancment for a minimal outlay.
The place To Purchase
