Estimated studying time: 8 minutes
Though all well-made suppressors are helpful, versatile instruments, typically a mannequin comes alongside that takes the idea to the subsequent degree. That’s the case with the SilencerCo Scythe-Ti, the mannequin designed to launch the producer’s premium line. That is the suppressor you have to be contemplating, whether or not you favor capturing from the bench or from a searching blind. Right here’s why.
The SilencerCo Scythe-Ti
Because the identify suggests, the Scythe-Ti is made out of titanium—sure, actually (extra on that later). This suppressor is designed for rifles in calibers starting from 223 Remington to 300 RUM, so you can say it’s versatile. To make issues simpler, SilencerCo ships the suppressor with each a 5/8×24 titanium direct thread mount and a .30-caliber aluminum Single-Port Anchor Brake. After all, when you get your fingers on it, you could find yourself wanting one for every of your rifles so that you’re not always swapping it round.
Causes for Making a Suppressor With Titanium
The obvious cause for using titanium for a suppressor is weight. Because the cliché goes, ounces turn out to be kilos once you’re supporting weight for prolonged durations (or just capturing offhand). Other than that, it’s an especially robust metallic with implausible strength-to-weight ratios. It’s additionally extremely immune to corrosion and sturdy sufficient to outlast many different metals. Ever so typically, you hear a naysayer claiming titanium can’t take the warmth, however in actuality, titanium is superb at dealing with excessive warmth. I imply, come on, do you actually assume SilencerCo would put out an inferior product? Completely not.
For many who actually benefit from the gun geekery—that’d be me—right here’s a short stroll into the weeds on titanium. SilencerCo used Grade 5 and Grade 9 titanium for the Scythe-Ti. Grade 5 is a generally used alpha-beta titanium alloy with a stellar strength-to-weight ratio. It’s even immune to corrosion brought on by saltwater and a few acids, which you need to admit is spectacular. This grade is 90 p.c titanium, 6 p.c aluminum, and 4 p.c vanadium. As for Grade 9, it’s thought of superior to different titanium grades and gives nice ductility. Apparently, Grade 9 is used to make issues like pacemakers. Combining the 2 grades makes good sense.
Options of the Scythe-Ti
It is a multi-caliber suppressor created for superior sound suppression of .30-caliber rifles. What meaning is it is likely to be made with an eye fixed—or ear, because the case could also be—for quieting .30-cal, but it surely works effectively on a wide range of others, too. This mannequin is totally welded, that means it isn’t user-serviceable, however that isn’t a foul factor (in truth, there are professionals to that development).
The Scythe-Ti measures 6.16 inches in size and weighs a scant 7.3 ounces. Diameter is 1.73 inches, which makes it narrower than the handguard on the rifle I put it on. It’s Kind II Anodized with an oil end for a further layer of safety from put on and tear—in addition to the weather—and that has the bonus of giving it a uninteresting sheen that doesn’t replicate daylight at inopportune moments. The suppressor is topped by a Single-Port Anchor Brake created to assist mitigate felt recoil with out including bulk.
Sound Suppression
To my ears, the Scythe-Ti gives nice sound suppression. However because of the group at SilencerCo, we do have a greater technique to clarify sound discount. In accordance with the suppressor maker, the decibel common is as follows:
5.56 NATO: 129.5 decibels 300 BLK: 127.6 decibels 308 Win: 128.4 decibels 300 Win Magazine: 132.9 decibels
Remember that noise discount is determined by a wide range of elements, corresponding to barrel materials and size, caliber, and what ammunition is getting used. These outcomes are simply to offer you a normal thought of what to anticipate with the Scythe-Ti, not a promise of particular efficiency.
Mount The Suppressor to Your Gun
There are a couple of completely different choices for mounting the SilencerCo Scythe-Ti to your rifle. On my AR-15, which has a Proof Analysis carbon fiber barrel in 223 Wylde, I’m utilizing the direct thread possibility. Which means all I needed to do was take away my muzzle brake and screw the suppressor on. Fairly simple.
Aspect word: Whenever you’re utilizing direct thread mounting relatively than using a brake that serves as a mount, do not forget that means your threads shall be uncovered once you take away the suppressor. Both ensure you know the place the muzzle brake is or get a thread cap for that gun. Don’t simply depart the barrel threads uncovered and unprotected.
The way it Shoots
This isn’t the primary suppressor I’ve ever used—it isn’t even the fifteenth. I’m unsure what number of I’ve used at this level. I instantly beloved the lowered weight of the Scythe-Ti. That’s partly as a result of my mind is remembering the best way pistol suppressors add bulk and size to an in any other case compact design, and partly as a result of hey, suppressors normally aren’t essentially light-weight. The Scythe-Ti actually is, although, and it makes you care rather a lot much less about including size to your barrel (and actually, this one isn’t a lot size, both).
My suppressor is the usual grey, and there’s part of my mind wishing it matched the rifle higher—however then I do have a factor for traditional black rifles. Colourful finishes have by no means been my factor. In case you actually need a black mannequin, you will get it in black for those who make your buy by way of Silencer Store. Alternatively, the grey makes it simple to visually distinguish it from different fashions.
Lengthy Vary
You may positively use this suppressor for long-range capturing, precision capturing, searching—no matter you need. I prefer it for searching as a result of it gives dependable sound discount whereas I’m chasing feral hogs. In contrast to whitetail season, searching hogs virtually at all times means a number of pictures fired. Typically it’s even a variety of pictures when there’s a giant sounder.
As for long-range capturing, the Single-Port Anchor Brake performs an essential function in recoil discount. Which means muzzle rise can also be lowered a bit, and that helps accuracy, follow-through, and follow-up pictures. As somebody who loves long-range—that means wherever from 500 yards to over a mile—I’ve to say this suppressor is superior. Utilizing a suppressor means you’ll be able to hear your spotter much better, assuming you’re utilizing one. It additionally provides you the power to higher hear that tell-tale ping of a bullet assembly metal. Huge, enormous professionals to utilizing a suppressor whilst you’re doing long-range capturing, and this titanium mannequin is terrific.
So, does this titanium suppressor work effectively? It does, and I’d 10/10 suggest it to anybody on the lookout for a high quality rifle suppressor.
READ MORE HERE: Suppressor 101: A Cleansing Information
The Abstract
It is a well-made suppressor that protects your listening to and the listening to of these round you whereas additionally chopping down felt recoil. In case you’re a hunter, the Scythe-Ti makes it so that you aren’t capturing up an space with noise. And for those who’re on the vary, it quiets issues down sufficient to make the neighbors comfortable.
Please word this mannequin isn’t full-auto rated. In case you require that or simply need the choice, it is best to try the Scythe-STM. That’s the stainless-steel model, and it’s additionally superior (I’ll fill you guys in on that one later). One thing else to pay attention to is that SilencerCo recommends you don’t use lead bullets with their sealed suppressors, and actually, who’s on the market operating lead bullets by way of their 223 Rem or 300 Win Magazine? Not a hardship to keep away from it.
This one simply is likely to be my favourite mannequin ever from SilencerCo, and that’s saying one thing. After all, they may come out with one thing even cooler. Time will inform. For now, give some like to the Scythe-Ti. It could make the right addition to your assortment.
MSRP $1174
Take a look at the Scythe-Ti right here.
If you wish to actually lower weight, get a Proof Analysis barrel, too.
*** Purchase and Promote on GunsAmerica! ***
Accessible on GunsAmerica Now
Kat Ainsworth Stevens is a prolific out of doors author based mostly in North Texas. Her love and delight of firearms extends to each self-defense and searching, and he or she’s pushed to show secure gun dealing with. Kat’s the creator of a number of books and 1000’s of articles in addition to a profitable editor with greater than a decade of expertise in advertising and marketing. With expertise in every little thing from defensive handgun use to discipline dressing a deer, Kat’s background is assorted and in depth. She firmly believes within the significance of defending the Second Modification in addition to the First.
When she’s not behind a gun or processing her personal recreation meat, Kat could be discovered trapping, boating, doing yoga, and mudding. The outside and the Lone Star State are the place she belongs.
Expertise
Writer:
Handgun Searching and anthologies together with The Deer Shot Again: And Different Searching Tales and How To not Shoot Fish and Different Deer That Bought Away.
Devoted Outdoorsman:
12 months-round fanatic of searching, trapping, and fishing.
Superior Coaching:
Greater than 1000 hours of coaching in defensive handguns, lengthy weapons, edged weapons, self-defense legislation, force-on-force, handgun retention, and associated subjects.
Targeted Specialty Abilities:
Professional witness. Massad Ayoob Group licensed Lethal Pressure Teacher and graduate of Lively Self Safety The Follow & Preparation of Being an Professional Witness.
