Should you do any AR constructing, you know the way it’s when you’ve got spare components. Something might be the impetus to do a brand new construct. I imply, if I’ve a spare grip, I could as effectively construct one other rifle proper? Effectively, this time I truly had a spare decrease, so I positively needed to do one thing with that. Since I ended up with a Dangerous Angle Division decrease and an entire KAK Trade WW III higher, I’m calling this one the BAD KAK WW III construct.
A Dangerous Angle to Begin With
I’ve ordered numerous customized lowers from Dangerous Angle Division. After I bought my XCOM decrease for my sci-fi construct I ended up getting two lowers. I bought these within the uncooked and ended up moly coating them. I did one in FDE for the principle XCOM X-9 construct, and did the opposite in SOCOM black for some later venture. I stored stumbling throughout the black decrease in my components bin as I used to be doing different work, and determined to see what I may put collectively.
I had a decrease components equipment from B. King Firearms, a spare buffer tube that I believe was a take off from a PSA decrease and a KAK enhanced buffer and flat coil spring that I had been ready to make use of on a venture. I’ve a bunch of spare grips, however the cool carbon fiber fiber end A2 Echo grip from MEAN Arms appeared like a superb match for this one. Initially I had a CAR inventory on the construct left over from a retro construct. I swapped that out to a daily M4 inventory later, since this was going to be a extra trendy construct.
The place To Purchase
The KAK WW III Higher
When it got here to the higher half of the rifle, I used to be somewhat extra pressed for components. All the pieces I had was arrange for both SBRs or pistols. Since I didn’t plan on SBR’ing or bracing this construct, I began wanting round for what sort of carbine configuration I wished to do. Since I’m a fan of sunshine and brief builds, even when they aren’t SBRs, I used to be wanting in that path. As luck would have it, proper across the time I used to be testing my choices, I bought an e-mail from KAK Trade with a sale on what they had been calling their WW III Midlength Light-weight higher.
KAK’s WW III choices often have fairly good reductions, as they are typically constructed from issues they’ve an extra of inventory on. That works for me, as they’re all first high quality components. So so long as there’s a configuration you want, it’s a win-win. You get a superb deal, they usually get to maneuver one thing they’ve an abundance of.
Now, I have a tendency to place collectively my very own uppers. I don’t have something towards manufacturing unit builds, however I like constructing, and may often choose precisely what components I would like if I do it myself. I didn’t have an actual plan in thoughts for this construct although, and the WW III checked off the packing containers I used to be in search of.
The WW III used a KAK flattop higher with ahead help and brass deflector. It was fitted with a 5.56mm 14.5-inch authorities profile barrel that was a contract overrun from, you guessed it, the U.S. authorities. KAK had considered one of their new HK flash hiders pinned and welded on to deliver it to 16 inches, so no worries on barrel size. Not having to take it and get it pinned and welded myself saved some money too. KAK used a midlength fuel system, which I’m a fan of. It used a 9.8-inch M-LOK KAK rail. I sometimes go along with longer rails, however the worth was proper on the higher, and it was somewhat completely different than my different builds. It shaves off some weight too, which isn’t a nasty factor. The sale worth was simply $225. I added in a KAK Bolt Service group and with the pin and weld possibility my whole was $$305.
Since I used to be ordering the higher and bolt provider group anyway, I added a KAK prolonged charging deal with as effectively. Their Huge Latch charging handles are my favourite, and I’ve used them on a good variety of builds now. They aren’t fancy, principally a GI charging deal with with an prolonged latch, however they work for me. There’s sufficient of an extension to make charging simple, even with optics mounted, however not a lot as to hold up on something. It’s a clear, easy design. They’re additionally fairly reasonably priced at solely $24, which is why I’ve a bunch of them.
I felt like calling this one a construct was a stretch since, when my KAK components arrived, I merely slapped the higher on my decrease, popped the charging deal with and BCG in, and was completed. Because the WW III high half is all KAK, and the decrease is from Dangerous Angle Division, I’m calling it the BAD KAK WW III construct.
The place To Purchase
The BAD KAK WW IIII
So, for a straightforward construct that began with some spare components and ended with grabbing an on sale higher, I’m fairly pleased with the outcomes. The gun appears clear to my eye, and handles nice. It’s mild at solely 5.15 kilos, about like an M1 carbine. That’s about good so far as I’m involved.
I had simply gotten one of many new Swamp Fox Raider prism sights across the time of the construct and determined to test it out on the KAK rifle. I wasn’t planning on working irons on this construct anyway, so the prism sight is an effective selection. Even when the battery dies (unlikely with a 35,000 hour runtime and a shake awake characteristic) and also you lose the illumination, you continue to have the etched reticle to shoot with. Including the Raider bumped my weight as much as 6.10 kilos which was nonetheless fairly good.
I’ve a ton of AR mags. GI surplus, Brownells aluminum, numerous generations of Magpul and some different odds and ends. I’ve been working with Amend2 mags over the summer time although and have had excellent outcomes with them so I snagged their translucent Mod C magazine to make use of with the construct. I do know Magpul simply launched their T Magazine, and I’ll get some to mess with finally, however I had the Amend2 already and knew it labored. I had a pair black Mod 3 Amend2 mags as effectively that I put aside to be used with the WW III.
Vary Time
Taking the WW III to the vary was uneventful, simply how I prefer it. The KAK higher ran every little thing I put by way of it with out difficulty. Being that I’ve used a number of KAK components in my earlier builds, I wasn’t shocked, despite the fact that I hadn’t used considered one of their full uppers earlier than.
The Swamp Fox Raider labored out effectively. I had beforehand examined it on an SBR and was happy with it. The glass was clear, and the reticle confirmed crisply. It was fairly usable even with out the illumination on. With the pink reticle turned on it made selecting up the sight quick, and there was loads of adjustment to make it seen even in vivid daylight. I had been taking pictures metal at 300 yards with the SBR and the Swamp Fox, which galvanized me since I don’t do a number of longer vary taking pictures. I figured if it did that with a 12.5-inch barrel then it must be not less than nearly as good with KAK’s 14.5-inch tube.
I sighted in with 62-grain Fiocchi Vary Dynamics .223 hundreds, and used these Winchester Goal & Observe 62-grain FMJ for my preliminary break-in and a few of my typical plinking. After confirming my POA, I stepped out the 300-yard gong once more with Hornady Frontier 75-grain BTHPs and PPU Matchline .223 75-grain HP BT hundreds. As I suspected, I used to be in a position to persistently ding the gong with little effort. I may have benched it and shot some teams, however as any of you who’ve learn my different items in all probability know, I solely do this when pressured by my editor. Metal and dynamic targets are way more enjoyable.
The WW III is fast to shoulder. The sunshine weight and compact general size made transitioning between targets quick and easy. It’s a pleasing rifle to shoot. Regardless of the lighter weight, the heavy KAK buffer and midlength fuel system made it a easy shooter. Not that 5.56mm is a thumper by any means, however some builds do shoot flatter than others.
The Flektarn Connection
I used to be pretty pleased with my grip and inventory arrange, however then I noticed the restricted drop of German Flektarn camo sample shares from B5 Programs. Since my XCOM decrease had pseudo German markings I figured Flektarn can be an ideal match. I fooled round and missed the preliminary drop and was kicking myself, however just lately discovered a set from Shooters Selection in South Carolina. They even had a superb worth on it and fairly quick delivery. They nonetheless had some listed not less than of this writing, too.
I picked up a Flektarn sample sling from Edgar Sherman Design off of Ebay together with a surplus German HK spring clip for the entrance of the sling. The B5 set consisted of a Bravo inventory, Sort 23 grip and a vertical foregrip. B5’s stuff is at all times strong. It made for a novel however sensible improve for the construct.
Spherical Up
For a construct that began off as a hodgepodge of what’s in my components bin, the KAK-centric WW III construct turned out fairly effectively. It’s a easy, clear carbine. The light-weight and slim profile make it deal with nice. Reliability was good, and accuracy was fairly acceptable for something I’ll be doing, which is generally plinking. I’ve a pair “critical” rifles if I ever actually need one, so most of my builds are only for enjoyable, and the BAD KAK WW III positively checks the enjoyable field.
Try Ammo To Go, the ammunition retail sponsor of TTAG, for your whole ammunition wants.
Product and gun opinions are carried out independently and product mentions made based mostly on the standard of the product and worth of curiosity to gun homeowners. Nonetheless, while you purchase by way of hyperlinks on our website, we could earn a fee to assist assist the prices of working the positioning and protecting it free for our guests.
