Why Add Weight to Your Precision Rifle

Rifle weight is a key issue when constructing a use case in your platform or system. Many people search for methods to make their rifle lighter, however what if you wish to make it heavier, and extra importantly, why would you wish to make it heavier?

Earlier than we talk about this product, I wish to clarify the “why” of constructing an deliberately heavy rifle for many who could also be puzzled by the concept.

First, we flip to the legal guidelines of movement when contemplating rifle recoil and why added weight could also be helpful.

Newton’s third legislation of movement states that for each motion, there may be an equal and reverse response; this is the reason a rifle recoils when fired.

Fortunately, on the shooter’s facet, the rifle itself soaks up a ton of that power as a result of it weighs considerably greater than the projectile being despatched downrange.

Because of this, it’s usually protected to imagine {that a} lighter gun may have extra felt recoil than a heavier gun in the identical caliber.

Secondly, the strategic distribution of weight will will let you fine-tune the steadiness of your rifle in order that it doesn’t work in opposition to you as you manipulate it in numerous capturing positions. Spend any time behind a rifle in a dynamic setting that’s both too entrance heavy or too rear heavy, and you’ll shortly find out how unwieldy it may be in comparison with a heavier however correctly balanced rifle.

This precept hits a sure excessive with competitors and goal rifles, the place the shooter is just not required to haul their rifle over lengthy distances in unpredictable terrain, comparable to precision rifle matches and long-range goal capturing. Constructing a heavy rifle will cut back recoil and, in flip, require much less work to get again on track and spot your impacts.

Salmon River Options is an equipment/components firm out of Put up Falls, Idaho that makes a speciality of components for precision rifle techniques.

Particularly, we will likely be each the built-in weights they make for the Aero Precision Solus competitors chassis in addition to their exterior M-LOK weights that can be utilized on most M-LOK chassis. These weights work to raise the already feature-rich Solus chassis when constructing for competitors capturing.

The place To Purchase

Aero Precision Solus competition chassis

Fore-end Weight

The fore finish weight is machined from a stable piece of brass and attaches very cleverly. It ships with 4 fasteners and sits snugly within the handguard, with a rib resting inside one of many inner clearance cuts.

Two of the fasteners interact with the bipod spigot holes, and the opposite two fasteners screw instantly into the brass weight dealing with the MLOK slots.

When the 2 bigger fasteners are tightened, the load’s engagement surfaces develop, making a rock-solid match. These fasteners are saved behind the MLOK in order to not have an effect on the usage of the integral ARCA rail.

All mentioned and performed, this provides an extra 35oz to the entrance chassis.

The one actual downside to this technique is that it removes the flexibility to mount a bipod spigot, which is, for essentially the most half, a non-issue because the Solus chassis has a full ARCA interface working the size of the handguard.

Inventory Weight

Salmon River’s second integral choice for the Solus is a inventory weight. This completely suits within the void current on the Solus competitors inventory and locks in place with a set of two fasteners, including 17oz and aiding in balancing the chassis on the rear.

The match and end on this half are distinctive. The black Cerakote end properly enhances Aero’s normal chassis finishes. This half is a no brainer when paired with the fore-end weight.

Exterior M-LOK Weights

The exterior weights are a really simple product with an intentional design. They mount instantly into your facet MLOK rails, taking over a complete of two normal MLOK slots per weight.

They ship in a set of two, boasting a weight of 6 oz every and 12 oz as a pair. A small however vital design incorporation is an upwards bias on mounting that received’t enable the load to intervene with utilizing an ARCA rail, such because the one on the Solus chassis.

These are a fantastic choice for added weight on many chassis available on the market and provide you with a strategy to tune your rifle’s steadiness higher.

Under is a Solus competitors rifle* I constructed out utilizing the inventory insert, fore finish weight, and a pair of units of exterior weights.

It’s sporting a hearty competitors profile and weighs 20 lbs 8.6oz in its present configuration, unloaded with out the bipod put in.

With the added weight and unforgiving muzzle brake, this rifle hardly strikes when fired, giving me zero regrets about stacking on the kilos.

Whenever you use these equipment paired with a muzzle brake, it might probably assist make follow-through second nature.

Having the ability to watch the outlet seem on paper at a distance is a cool expertise, and when put to apply on metal, it does a shocking quantity to make sure you catch your splash within the scope.

I’m excited to see this firm offering platform assist for a wanted inner weight resolution that doesn’t compromise type issue!